Precautions for CNC lathe processingCNC lathe processing is a high-tech processing method of precision hardware parts. Various types of materials can be processed, including 316, 304 stainless steel, carbon steel, alloy steel, alloy aluminum, zinc alloy, titanium alloy, copper, iron, plastic, acrylic, POM, UHWM and other raw materials, which can be processed into square and round combinations The complex structure of the parts.

Note for CNC lathe processing:

1. When aligning the workpiece, only use the hand to move the chuck or open the lowest speed for alignment, not high-speed alignment.

2. When changing the rotation direction of the spindle, stop the spindle first, and do not change the rotation direction suddenly.

3. When loading and unloading the chuck, only turn the V-belt by hand to drive the spindle to rotate. It is absolutely forbidden to directly drive the machine tool to loosen or tighten it. At the same time, block wooden boards on the bed surface to prevent accidents.

4. The tool should not be installed too long, the gasket should be flat and the width should be the same as the width of the bottom of the tool.

5. It is not allowed to drive the reverse rotation method to brake the spindle rotation during work.